Neuro Amp EX

Neural Amplifier | Microneurography | Measuring Nerve Activity

$2,050.00 USD

产品代码：FE285

神经的音箱EX is a front-end device that extends the capabilities of ourPowerLab数据采集系统选项以使用微型技术录制神经活动。

As a low noise and high gain device, it is ideal for all recording environments requiring a wide bandwidth (100 Hz to 5 kHz) and a high signal to noise ratio.

checkmarkShips from USA
预计交货时间：2-5个工作日。

Quote Request

Book a Demo

Overview

Neuro AMP EX是低噪声和高增益神经放大器装置，其适用于需要宽带宽（100Hz至5kHz）和高信噪比的所有记录环境。

As a front-end device, the Neuro Amp gives researchers the ability to measure nerve activity using the microneurographic technique, when using aC系列前端界面or traditionalPowerLabdata acquisition device.

Neuro AMP EX完全分离，适用于人类和动物使用。

神经的音箱EXprovides:

Full electrical isolation from power-line (mains) circuitry to guarantee subject safety
A low-noise, high-gain differential amplifier specifically designed for measuring nerve activity (nerve traffic)
Software-controlled low-pass, high-pass, and mains filters to remove unwanted signal frequencies
Audio output to listen to neurological signals

Supplied with the Neuro Amplifier EX:

TheNeuro Amp EX headstage
Six male Amphenol connectors for customization of microelectrode adapters for use with the Neuro Amp EX Headstage

（注意：未提供微电极）。

关于Neuro AMP前：

神经的音箱EX [FE285] is designed to allow ourPowerLabdata acquisition systems to perform isolated measurements of single-unit or multi-unit extracellular action potentials from single neurons or axons, from human or animal subjects. It consists of an electrically isolated differential input AC amplifier with an isolated ground connection. It is possible to ‘daisy-chain’ multiple Neuro Amp EXs to record from separate subjects, using separate grounds.

*请注意that the Neuro Amp EX is not suitable for intracellular recording with glass microelectrodes.

研究应用程序

Features

Full electrical isolation from power-line (mains) circuitry to guarantee subject safety
A low-noise, high-gain differential amplifier specifically designed for neurophysiological extracellular signal measurements
软件控制的低通，高通和电源滤波器以消除特定用途的不需要的信号频率
Audio output to listen to neurological signals

Neuro AMP EX展台提供100 x的增益，具有10 Hz高通滤波器。电缆屏蔽直接连接到壳体，限制了输入端子的额外屏蔽的需要。

Support

支持文章

Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.

Training and Workshops

Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.

查看培训和研讨会

Details and Tech Specs

Technical

Neuro Amp EX

输入

Connection type: Five-pin Redel connector
输入configuration: One isolated differential channel with isolated ground reference
输入阻抗：100mΩ
Safety: Approved to IEC 60601-1 Standard (BF rating)
隔离：4000 vrms（50 Hz 1分钟）
输入ranges: ±20 μV to ±1 mV full scale in 6 steps (combined PowerLab, Neuro Amp EX front-end, and headstage)

过滤

低通滤波：软件可选择：1 kHz，2 kHz，5 kHz
High-pass filtering: First order filter. Software-selectable: 100 Hz, 300 Hz.

Output

Signal: ±4.5 V maximum
Audio output: Stereo jack with mono output; ±200 mV full scale, current limited to ±5 mA. Suitable for headphones or powered speakers.

Control Port

I²C端口：提供控制和电源。

Physical Configuration

尺寸（H×W×D）：55 mm×120 mm×260 mm（2.2“×4.7”×10.2“）
Weight: 1.3 kg (2 lb 13 oz)
Power requirements: ~2 W
操作条件：5-35°C，0-90％湿度（非凝结）
运输/储存条件：0-40°C，0-95％湿度（非凝结）

安全/监管信息

Safety: Complies with IEC 60601-1:2012
EMC: Complies with IEC 60601-1-2:2014
Equipment: Use only with an ADInstruments 35 series PowerLab. The PowerLab must be connected to safety earth via the power supply cable to ensure electrical safety.