Thank you for your interest inBNC Cables and Adapters。请填写并提交以下表格d an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from thecontact page.
×Thank you for your interest inBNC Cables and Adapters。请填写并提交以下表格d an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from thecontact page.
×Thank you for your interest inBNC Cables and Adapters。请填写并提交以下表格d an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from thecontact page.
×MLAC10
$28.00 USD
Connects to any BNC plug, allowing any signal to be split between two devices.
hourglassShips from Overseas
Estimated delivery time: 3 weeks.
MLAC08
$28.00 USD
Allows connection of devices with the corresponding stereo output connector to any BNC input of a PowerLab.
This product is not currently available for purchase in the EU.
hourglassShips from Overseas
Estimated delivery time: 1 month.
MLAC23
$28.00 USD
Used to connect a Grass Amplifier Analog Output or a Finapres Nova Analog Output to a PowerLab.
checkmarkShips from USA
Estimated delivery time: 2-5 business days.
MLAC24
$28.00 USD
Used to connect audio Headphones to a PowerLab Output.
Can be used with the PowerLab and LabChart in conducting audio evoked experiments in the student classroom.
hourglassShips from Overseas
Estimated delivery time: 1 month.
MLAC09
$17.00 USD
Used with the Thermocouple/Analog Converter.
hourglassShips from Overseas
Estimated delivery time: 2 months.
MLAC04
$28.00 USD
Used to connect the Thermocouple to Analog Converter to a PowerLab.
hourglassShips from Overseas
Estimated delivery time: 1 month.
MLAC12
$33.00 USD
Used to connect the Millar Pressure Signal Conditioner to the PowerLab inputs.
checkmarkShips from USA
Estimated delivery time: 2-5 business days.
MLAC07
$33.00 USD
A set of two BNC to Alligator Clips (differential).
hourglassShips from Overseas
Estimated delivery time: 1 month.
MLAC01
$17.00 USD
A fully moulded BNC to BNC Cable (1 m).
hourglassShips from Overseas
Estimated delivery time: 3 months.
MLAC30
$18.00 USD
A moulded BNC to BNC Cable (2 m).
Use with Tendon Hammer and any transducer with a BNC connector where an extended cable is required.
hourglassShips from Overseas
Estimated delivery time: 1 month.
MLAC16
$21.00 USD
A BNC to BNC Cable (6 m long).
hourglassShips from Overseas
Estimated delivery time: 1 month.
MLAC22
$38.00 USD
Required for use with Inputs 3 and 4 on the PowerLab 26T to allow the connection and operation of any front-ends or other external devices with BNC connectors. Can also be used to connect a transducer with a BNC connector to Inputs 1 and 2.
Supplied with the following:
(2) in PowerLab 26T (LTS)
(1) in Galvanic Oxygen Electrode
hourglassShips from Overseas
Estimated delivery time: 1 month.
MLAC27
$55.00 USD
Used with multichannel Bridge or Bio Amps including the Quad Bridge Amp, Octal Bridge Amp, Octal Bio Amp, or any other device with multiple BNC connections.
The cable has four colored sheaths, black, red, blue and yellow, to enable easy identification of cable connections.
hourglassShips from Overseas
Estimated delivery time: 4 months.
MLAC10
Connects to any BNC plug, allowing any signal to be split between two devices.
MLAC08
Allows connection of devices with the corresponding stereo output connector to any BNC input of a PowerLab.
This product is not currently available for purchase in the EU.
MLAC23
Used to connect a Grass Amplifier Analog Output or a Finapres Nova Analog Output to a PowerLab.
MLAC24
Used to connect audio Headphones to a PowerLab Output.
Can be used with the PowerLab and LabChart in conducting audio evoked experiments in the student classroom.
MLAC04
Used to connect the Thermocouple to Analog Converter to a PowerLab.
MLAC12
Used to connect the Millar Pressure Signal Conditioner to the PowerLab inputs.
MLAC07
A set of two BNC to Alligator Clips (differential).
MLAC30
A moulded BNC to BNC Cable (2 m).
Use with Tendon Hammer and any transducer with a BNC connector where an extended cable is required.
MLAC22
Required for use with Inputs 3 and 4 on the PowerLab 26T to allow the connection and operation of any front-ends or other external devices with BNC connectors. Can also be used to connect a transducer with a BNC connector to Inputs 1 and 2.
Supplied with the following:
(2) in PowerLab 26T (LTS)
(1) in Galvanic Oxygen Electrode
MLAC27
Used with multichannel Bridge or Bio Amps including the Quad Bridge Amp, Octal Bridge Amp, Octal Bio Amp, or any other device with multiple BNC connections.
The cable has four colored sheaths, black, red, blue and yellow, to enable easy identification of cable connections.
$17.00 USD-$55.00 USD
We offer a wide range of BNC cables and adapters - BNC to BNC cables, BNC connector adapters and more.
We offer a wide range of BNC cables and adapters - BNC to BNC cables, BNC connector adapters and more.
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC10
MLAC10
Connects to any BNC plug, allowing any signal to be split between two devices.
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC08
MLAC08
Allows connection of devices with the corresponding stereo output connector to any BNC input of a PowerLab.
This product is not currently available for purchase in the EU.
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC23
MLAC23
Used to connect a Grass Amplifier Analog Output or a Finapres Nova Analog Output to a PowerLab.
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC24
MLAC24
Used to connect audio Headphones to a PowerLab Output.
Can be used with the PowerLab and LabChart in conducting audio evoked experiments in the student classroom.
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC09
MLAC09
Used with the Thermocouple/Analog Converter.
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC04
MLAC04
Used to connect the Thermocouple to Analog Converter to a PowerLab.
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC12
MLAC12
Used to connect the Millar Pressure Signal Conditioner to the PowerLab inputs.
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC07
MLAC07
A set of two BNC to Alligator Clips (differential).
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC01
MLAC01
A fully moulded BNC to BNC Cable (1 m).
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC30
MLAC30
A moulded BNC to BNC Cable (2 m).
Use with Tendon Hammer and any transducer with a BNC connector where an extended cable is required.
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC16
MLAC16
A BNC to BNC Cable (6 m long).
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC22
MLAC22
Required for use with Inputs 3 and 4 on the PowerLab 26T to allow the connection and operation of any front-ends or other external devices with BNC connectors. Can also be used to connect a transducer with a BNC connector to Inputs 1 and 2.
Supplied with the following:
(2) in PowerLab 26T (LTS)
(1) in Galvanic Oxygen Electrode
//www.sslocked.com/products/bnc-cables-and-adapters#product-MLAC27
MLAC27
Used with multichannel Bridge or Bio Amps including the Quad Bridge Amp, Octal Bridge Amp, Octal Bio Amp, or any other device with multiple BNC connections.
The cable has four colored sheaths, black, red, blue and yellow, to enable easy identification of cable connections.
Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.
Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.
See Training & Workshops