Get a quote
Thank you for your interest inCatheter Interface Cables。请填写和submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from thecontact page.
×Ask a question
Thank you for your interest inCatheter Interface Cables。请填写和submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from thecontact page.
×Request a demo
Thank you for your interest inCatheter Interface Cables。请填写和submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from thecontact page.
×
Catheter Interface Cables
AEC-10D, PEC-10D, PEC-4d, TEC-10D, AEC-10C, PEC-10C, TEC-10C
Configurations
Catheter Interface Cable (Low Profile to Bridge Amp, 10 ft)
AEC-10D
$299.00 USD
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to anyADInstruments Bridge Amp。
checkmarkShips from USA
Estimated delivery time: 2-5 business days.
Catheter Interface Cable (Low Profile to Pressure Control Unit, 10 ft)
TEC-10D
$245.00 USD
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to aPressure Control Unit。
checkmarkShips from USA
Estimated delivery time: 2-5 business days.
Catheter Interface Cable (Low Profile to Pressure Signal Conditioner, 10 ft)
PEC-10D
$299.00 USD
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
- Pressure Signal Conditioner
- secondary pressure input of aMPVS Ultra Single Segment PV UnitorMPVS Ultra PV Unit
checkmarkShips from USA
Estimated delivery time: 2-5 business days.
Catheter Interface Cable (Low Profile to Single Segment PV Unit, 4 ft)
PEC-4d
$266.00 USD
A 1.2 m (4 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
- secondary pressure input of aMPVS Ultra Single Segment PV UnitorMPVS Ultra PV Unit
- Pressure Signal Conditioner
hourglassShips from Overseas
Estimated delivery time: 1 month.
Catheter Interface Cable (Viking to Bridge Amp, 10 ft)
AEC-10C
$365.00 USD
Connects any Mikro-Tip transducer with a Viking connector type to anyADInstruments Bridge Amp, such as theNon Invasive Pulse Tonometer。(Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
hourglassShips from Overseas
Estimated delivery time: 1 month.
导管接口电缆(维京来讲压力ol Unit, 10 ft)
TEC-10C
$326.00 USD
Connects any Mikro-Tip transducer with a Viking connector type to aPressure Control Unit, such as theNon Invasive Pulse Tonometer。(Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
hourglassShips from Overseas
Estimated delivery time: 1 month.
Catheter Interface Cable (Viking to Pressure Signal Conditioner, 10 ft)
PEC-10C
$365.00 USD
Connects any Mikro-Tip transducer with a Viking connector type to aPressure Signal Conditioner, such as theNon Invasive Pulse Tonometer。(Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
hourglassShips from Overseas
Estimated delivery time: 1 month.
Configurations
Catheter Interface Cable (Low Profile to Bridge Amp, 10 ft)
AEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to anyADInstruments Bridge Amp。
Catheter Interface Cable (Low Profile to Pressure Control Unit, 10 ft)
TEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to aPressure Control Unit。
Catheter Interface Cable (Low Profile to Pressure Signal Conditioner, 10 ft)
PEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
- Pressure Signal Conditioner
- secondary pressure input of aMPVS Ultra Single Segment PV UnitorMPVS Ultra PV Unit
Catheter Interface Cable (Low Profile to Single Segment PV Unit, 4 ft)
PEC-4d
A 1.2 m (4 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
- secondary pressure input of aMPVS Ultra Single Segment PV UnitorMPVS Ultra PV Unit
- Pressure Signal Conditioner
Catheter Interface Cable (Viking to Bridge Amp, 10 ft)
AEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to anyADInstruments Bridge Amp, such as theNon Invasive Pulse Tonometer。(Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
导管接口电缆(维京来讲压力ol Unit, 10 ft)
TEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to aPressure Control Unit, such as theNon Invasive Pulse Tonometer。(Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
Catheter Interface Cable (Viking to Pressure Signal Conditioner, 10 ft)
PEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to aPressure Signal Conditioner, such as theNon Invasive Pulse Tonometer。(Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
Catheter Interface Cables
$245.00 USD-$365.00 USD
A range of catheter interface cables compatible with Millar Mikro-Tip pressure catheters.
Overview
Millar Mikro-Tip pressure catheters can be interfaced with a range of appropriate amplifiers via a compatible catheter interface cable. Hardware includes:
- anyADInstruments Bridge Amp
- Pressure Control Unit
- Pressure Signal Conditioner
- MPVS Ultra Single Segment PV Unit
- MPVS Ultra PV Unit (large & small animals)
A range of compatible catheter interface cables is listed here.
Configurations
Catheter Interface Cable (Low Profile to Bridge Amp, 10 ft)
copy permalink
//www.sslocked.com/products/catheter-interface-cables#product-AEC-10D
AEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to anyADInstruments Bridge Amp。
Catheter Interface Cable (Low Profile to Pressure Control Unit, 10 ft)
copy permalink
//www.sslocked.com/products/catheter-interface-cables#product-TEC-10D
TEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to aPressure Control Unit。
Catheter Interface Cable (Low Profile to Pressure Signal Conditioner, 10 ft)
copy permalink
//www.sslocked.com/products/catheter-interface-cables#product-PEC-10D
PEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
- Pressure Signal Conditioner
- secondary pressure input of aMPVS Ultra Single Segment PV UnitorMPVS Ultra PV Unit
Catheter Interface Cable (Low Profile to Single Segment PV Unit, 4 ft)
copy permalink
//www.sslocked.com/products/catheter-interface-cables#product-PEC-4d
PEC-4d
A 1.2 m (4 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
- secondary pressure input of aMPVS Ultra Single Segment PV UnitorMPVS Ultra PV Unit
- Pressure Signal Conditioner
Catheter Interface Cable (Viking to Bridge Amp, 10 ft)
copy permalink
//www.sslocked.com/products/catheter-interface-cables#product-AEC-10C
AEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to anyADInstruments Bridge Amp, such as theNon Invasive Pulse Tonometer。(Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
导管接口电缆(维京来讲压力ol Unit, 10 ft)
copy permalink
//www.sslocked.com/products/catheter-interface-cables#product-TEC-10C
TEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to aPressure Control Unit, such as theNon Invasive Pulse Tonometer。(Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
Catheter Interface Cable (Viking to Pressure Signal Conditioner, 10 ft)
copy permalink
//www.sslocked.com/products/catheter-interface-cables#product-PEC-10C
PEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to aPressure Signal Conditioner, such as theNon Invasive Pulse Tonometer。(Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
Catheter Interface Cable (Low Profile to Bridge Amp, 10 ft)
AEC-10D
Catheter Interface Cable (Low Profile to Pressure Control Unit, 10 ft)
TEC-10D
Catheter Interface Cable (Low Profile to Pressure Signal Conditioner, 10 ft)
PEC-10D
Catheter Interface Cable (Low Profile to Single Segment PV Unit, 4 ft)
PEC-4d
Catheter Interface Cable (Viking to Bridge Amp, 10 ft)
AEC-10C
导管接口电缆(维京来讲压力ol Unit, 10 ft)
TEC-10C
导管接口电缆(维京来讲压力ol Unit, 10 ft)
TEC-10C
Support
Support Articles
Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.
Training and Workshops
Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.
See Training & Workshops
